⚝
One Hat Cyber Team
⚝
Your IP:
3.137.151.203
Server IP:
162.254.39.145
Server:
Linux premium289.web-hosting.com 4.18.0-513.11.1.lve.el8.x86_64 #1 SMP Thu Jan 18 16:21:02 UTC 2024 x86_64
Server Software:
LiteSpeed
PHP Version:
8.2.28
Buat File
|
Buat Folder
Eksekusi
Dir :
~
/
usr
/
share
/
snmp
/
mibs
/
View File Name :
UCD-IPFWACC-MIB.txt
UCD-IPFWACC-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, IpAddress, Integer32, Counter32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC ucdExperimental FROM UCD-SNMP-MIB; ucdIpFwAccMIB MODULE-IDENTITY LAST-UPDATED "9912160000Z" ORGANIZATION "University of California, Davis" CONTACT-INFO "This mib is no longer being maintained by the University of California and is now in life-support-mode and being maintained by the net-snmp project. The best place to write for public questions about the net-snmp-coders mailing list at net-snmp-coders@lists.sourceforge.net. postal: Wes Hardaker P.O. Box 382 Davis CA 95617 email: net-snmp-coders@lists.sourceforge.net " DESCRIPTION "This module defines MIB components for reading information from the accounting rules IP Firewall. This would typically let you read the rules and the counters. I did not include some flags and fields that I considered irrelevant for the accounting rules. Resetting the counters of the rules by SNMP would be simple, but I don't consider it so useful. I gave no consideration to implementing write access for allowing modification of the accounting rules. Cristian.Estan@net.utcluj.ro " REVISION "9912160000Z" DESCRIPTION "SMIv2 version converted from an older MIB definition." ::= { ucdExperimental 1 } ipFwAccTable OBJECT-TYPE SYNTAX SEQUENCE OF IpFwAccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table with the accounting rules of the IP firewall" ::= { ucdIpFwAccMIB 1 } ipFwAccEntry OBJECT-TYPE SYNTAX IpFwAccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An accounting rule of the IP firewall" INDEX { ipFwAccIndex } ::= { ipFwAccTable 1 } IpFwAccEntry ::= SEQUENCE { ipFwAccIndex Integer32, ipFwAccSrcAddr IpAddress, ipFwAccSrcNetMask IpAddress, ipFwAccDstAddr IpAddress, ipFwAccDstNetMask IpAddress, ipFwAccViaName DisplayString, ipFwAccViaAddr IpAddress, ipFwAccProto INTEGER, ipFwAccBidir INTEGER, ipFwAccDir INTEGER, ipFwAccBytes Counter32, ipFwAccPackets Counter32, ipFwAccNrSrcPorts Integer32, ipFwAccNrDstPorts Integer32, ipFwAccSrcIsRange INTEGER, ipFwAccDstIsRange INTEGER, ipFwAccPort1 Integer32, ipFwAccPort2 Integer32, ipFwAccPort3 Integer32, ipFwAccPort4 Integer32, ipFwAccPort5 Integer32, ipFwAccPort6 Integer32, ipFwAccPort7 Integer32, ipFwAccPort8 Integer32, ipFwAccPort9 Integer32, ipFwAccPort10 Integer32 } ipFwAccIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Reference index for each firewall rule." ::= { ipFwAccEntry 1 } ipFwAccSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The source address in the firewall rule." ::= { ipFwAccEntry 2 } ipFwAccSrcNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The netmask of the source address in the firewall rule." ::= { ipFwAccEntry 3 } ipFwAccDstAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination address in the firewall rule." ::= { ipFwAccEntry 4 } ipFwAccDstNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The netmask of the destination address in the firewall rule." ::= { ipFwAccEntry 5 } ipFwAccViaName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the interface to which the rule applies. If no interface is associated with the present rule, this should contain a dash (-)." ::= { ipFwAccEntry 6 } ipFwAccViaAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the interface to which the rule applies. Using this parameter makes sense when multiple addresses are associated to the same physical interface. If not defined for the current rule this should be set to 0." ::= { ipFwAccEntry 7 } ipFwAccProto OBJECT-TYPE SYNTAX INTEGER { other(1), all(2), tcp(3), udp(4), icmp(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol(s) to which the rule applies." ::= { ipFwAccEntry 8 } ipFwAccBidir OBJECT-TYPE SYNTAX INTEGER { unidirectional(1), bidirectional(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the rule works in both directions (i.e. with the source and destination parts swapped) or not." ::= { ipFwAccEntry 9 } ipFwAccDir OBJECT-TYPE SYNTAX INTEGER { both(1), in(2), out(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the rule applies to packets entering or exiting the kernel." ::= { ipFwAccEntry 10 } ipFwAccBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes that matched this rule since the last reset of the counters." ::= { ipFwAccEntry 11 } ipFwAccPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that matched this rule since the last reset of the counters." ::= { ipFwAccEntry 12 } ipFwAccNrSrcPorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports that refer to the source address." ::= { ipFwAccEntry 13 } ipFwAccNrDstPorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports that refer to the destination address." ::= { ipFwAccEntry 14 } ipFwAccSrcIsRange OBJECT-TYPE SYNTAX INTEGER { srchasrange(1), srchasnorange(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Interpret the first two ports of the source part as the upper and lower limit of an interval or not." ::= { ipFwAccEntry 15 } ipFwAccDstIsRange OBJECT-TYPE SYNTAX INTEGER { dsthasrange(1), dsthasnorange(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Interpret the first two ports of the destination part as the upper and lower limit of an interval or not." ::= { ipFwAccEntry 16 } ipFwAccPort1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port number 1." ::= { ipFwAccEntry 17 } ipFwAccPort2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port number 2." ::= { ipFwAccEntry 18 } ipFwAccPort3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port number 3." ::= { ipFwAccEntry 19 } ipFwAccPort4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port number 4." ::= { ipFwAccEntry 20 } ipFwAccPort5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port number 5." ::= { ipFwAccEntry 21 } ipFwAccPort6 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port number 6." ::= { ipFwAccEntry 22 } ipFwAccPort7 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port number 7." ::= { ipFwAccEntry 23 } ipFwAccPort8 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port number 8." ::= { ipFwAccEntry 24 } ipFwAccPort9 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port number 9." ::= { ipFwAccEntry 25 } ipFwAccPort10 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port number 10." ::= { ipFwAccEntry 26 } END